IPv4 vs IPv6: Which One Are You Actually Using Right Now?
Your connection probably has two addresses right now, not one. One is short, four numbers with dots. The other is long, full of colons and letters. Here is how to tell which one is actually carrying your traffic, and what to do when it is the wrong one.

Check which one you're using in 30 seconds
Do this first, because the address a website sees is what counts, not the one in your router settings.
- Open the What Is My IP tool. The address on the page is the one that carried your request to us.
- Read the shape. Four numbers with dots, like 203.0.113.45, means IPv4. Groups with colons, like 2001:db8:85a3::8a2e:370:7334, means IPv6.
- Test both at once from a terminal. Run curl -4 icanhazip.com for your IPv4 address and curl -6 icanhazip.com for your IPv6 address. If the second one hangs or errors, you have no IPv6 route. That is normal.
- On your phone, open your Wi-Fi network details. If you have IPv6, a long address with colons shows up next to the usual IPv4 one.
When I tested this at home, the tool showed an IPv4 address and the curl -6 test timed out. My provider hasn't rolled out IPv6 to my street yet. A friend's connection across town showed both versions. Two houses, two different answers, both fine.
How to read an IPv6 address without panicking
An IPv6 address looks like alphabet soup at first glance. It isn't. It is just eight groups of four hexadecimal digits, joined by colons, and two shortcuts make it shorter:
- Leading zeros get dropped. The group 0db8 becomes db8, and 0042 becomes 42.
- One run of all-zero groups collapses to :: So 2001:0db8:0000:0000:0000:ff00:0042:8329 shortens to 2001:db8::ff00:42:8329. Same address, half the typing.
The double colon can only appear once in an address, which is how you know exactly how many zero groups it stands for. And the shortest IPv6 address of all is ::1, your own computer talking to itself, the IPv6 version of 127.0.0.1.
Why does IPv6 even exist? IPv4 has about 4.3 billion addresses, and the world ran out of fresh ones to hand out years ago. IPv6 has 128 bits instead of 32, which works out to roughly 340 undecillion addresses, enough for every device on earth to have its own. That is the whole reason it was built, not speed, not security, just room.
Prefer watching? This short Simplilearn explainer walks through both address formats the same way.
Why you probably have both, and your device picks for you
Most modern connections are dual-stack, which means they hold both address types at once. Your device doesn't ask you which one to use. It uses a trick called Happy Eyeballs, defined in RFC 8305: your browser races an IPv4 connection and an IPv6 connection against each other and takes whichever answers first. If IPv6 fails, it falls back to IPv4 so fast you never notice.
That is why the version can change from one site to the next. One site answers faster over IPv6, another only has IPv4, so you land on IPv4. The only way to know for a given connection is to check, the way you just did.
Here is my honest take: for everyday browsing, streaming, and messaging, the version makes no difference you can feel. Anyone who tells you switching to IPv6 will double your speed is selling something. Google publishes a live count of how much of its traffic arrives over IPv6, if you want to see how far the rollout has actually come.
The proxy trap: most free proxies only speak IPv4
This is the part the comparison articles skip, and it is the part that actually bites proxy users. Almost every free proxy on the ProxyNest list is IPv4, and that has two sharp edges.
- An IPv4 proxy can't reach an IPv6-only site. If a service only has an IPv6 address, an IPv4 proxy has no route to it. Your request just fails, and the error looks like a dead proxy even though the proxy is fine.
- A proxy changes the version a site sees. Set an IPv4 proxy from the list, then re-check with the What Is My IP tool. The address shown now belongs to the proxy, in the proxy's country. That is how you prove the proxy is working, and why your IP can suddenly show a different city after you turn one on.
There is a related leak worth knowing about if you use a VPN instead of a proxy. Some VPNs only handle IPv4 traffic. If your connection has IPv6, some apps can slip out over IPv6 and expose your real address while the VPN looks connected. That is called an IPv6 leak, and you can test for it with our Leak Test. A browser proxy doesn't have this hole, because the browser sends everything through the proxy. If your VPN has an "IPv6 leak protection" switch, turn it on.
When the version actually matters
Three situations where IPv4 vs IPv6 is a real decision, not trivia:
- Hosting something at home. With IPv6, every device can hold its own public address, so a game server or home camera is reachable from outside without port forwarding. With IPv4 behind carrier-grade NAT, outside connections can't reach you at all. Test the port with the Port Checker to see what the internet can actually reach.
- Your provider ran out of IPv4. Some providers put customers behind carrier-grade NAT and share one public IPv4 address between many households. If a site blocks that shared address, you inherit the block. IPv6 is the way out, because your address is yours alone. We covered the same trap in the public vs private IP guide.
Quick answers
- Do I need to switch to IPv6? No. If your provider offers it, your device already uses it when it helps. If they don't, nothing you do on your side creates it.
- Can I turn IPv6 off? Yes, in your network adapter settings, but there is rarely a reason to. Only turn it off to test one specific problem, then turn it back on.
- Does a proxy hide my IPv6 address? A proxy set in your browser hides whichever address the site would have seen, because the site sees the proxy's address instead. Check it with the What Is My IP tool while the proxy is on.
- Why does one site see IPv4 and another see IPv6? Each site answers over the version it supports, and your browser picks the faster one per connection. Both readings are correct.
- Is my IP changing related to this? Usually not. If your address changes often, your provider is rotating it, which we explained in why your IP keeps changing.
Go check yours
That is the whole check. You now know how to read both formats, how to test which one you have, and when the answer actually changes something. Go check yours, then try a proxy and watch the version and the address change together.
Comments
Loading comments…
Leave a comment